PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 72581
72581 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The HEATER,SPACE,ELECTRIC is a the manufacturer industrial component. Key specifications include phase: SINGLE, width: 9.250 INCHES NOMINAL IN, height: 6.250 INCHES NOMINAL IN, current_type: AC, mounting_type: HAND CARRY, prime_mover_type: ELECTRIC MOTOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-448-3765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72581
NSN: 5315-00-448-3765
FSC: 5315
CAGE: 57712 — TELEMECHANICS INC (USA)
SPECIFICATIONS
phaseSINGLE
width9.250 INCHES NOMINAL IN
height6.250 INCHES NOMINAL IN
quantity1
current_typeAC
mounting_typeHAND CARRY
prime_mover_typeELECTRIC MOTOR
special_featuresINCLOSURE MATERIAL IS MADE OF PLASTIC
voltage_in_volts110.0
speed_adjustmentsSINGLE SPEED
surface_treatmentPAINT
frequency_in_hertz60.0
NSN5315-00-448-3765
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 72581 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END STYLE: OVAL
•
FIRST END OUTER RADIUS: 0.0156 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
PIN OVERALL LENGTH: 2.000 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.15250 INCHES MINIMUM AND 0.15375 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END STYLEOVAL
FIRST END OUTER RADIUS0.0156 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
PIN OVERALL LENGTH2.000 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.15250 INCHES MINIMUM AND 0.15375 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
34G7258Interchangeable
interchangeable cross-reference
interchangeable
72581Interchangeable
interchangeable cross-reference
interchangeable
29440Interchangeable
interchangeable cross-reference
interchangeable
SCB98205Interchangeable
Same NIIN cross-reference
interchangeable
TCD0631-72581Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 72581?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72581?
72581 is a HEATER,SPACE,ELECTRIC.
What parts can replace 72581?
There are 5 known substitutes for 72581: 34G7258, 72581, 29440 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 72581?
72581 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-448-3765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72581

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026