PartsTable
Technical Data Sheet
Download PDF

72574 — HOLDING TOOL,SPACER LOCKING BAIL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

72574: HOLDING TOOL,SPACER LOCKING BAIL.

HOLDING TOOL,SPACER LOCKING BAIL. Key specifications include cut_type: RECTANGULAR OVERALL, material: GLASS ENCLOSURE, overall_length: 0.280 INCHES MAXIMUM IN, hardness_rating: 60.0 SHORE DUROMETER A MAXIMUM OVERALL, mounting_method: PRESS FIT, special_features: TELETYPEWRITER MAINTENANCE TOOL; USED WITH NO. 72575 BENDING TOOL TO ADJUST SPACER LOCKING BAIL FINGER.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-064-7756, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72574
NSN: 5330-00-064-7756
NIINs: 000647756, 004483764, 014629505
FSC: 5330 — Packing and Gasket Materials
CAGE: 45RP7 — DRESSTA NORTH AMERICA LTD (USA)
SPECIFICATIONS
cut_typeRECTANGULAR OVERALL
materialGLASS ENCLOSURE
overall_length0.280 INCHES MAXIMUM IN
hardness_rating60.0 SHORE DUROMETER A MAXIMUM OVERALL
mounting_methodPRESS FIT
special_featuresTELETYPEWRITER MAINTENANCE TOOL; USED WITH NO. 72575 BENDING TOOL TO ADJUST SPACER LOCKING BAIL FINGER
peripheral_diameter0.672 INCHES NOMINAL IN
center_hole_diameter0.594 INCHES NOMINAL IN
cross-sectional_height0.062 INCHES NOMINAL IN
semiconductor_materialSILICON
end_item_identificationSAFCSE/IFSCM26512
mounting_facility_quantity3
NSN5330-00-064-7756
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 72574 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.062 INCHES NOMINAL IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CUT TYPE: RECTANGULAR OVERALL
•
PERIPHERAL DIAMETER: 0.672 INCHES NOMINAL IN
•
COLOR: GREEN
•
CENTER HOLE DIAMETER: 0.594 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.062 INCHES NOMINAL IN
HARDNESS RATING60.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CUT TYPERECTANGULAR OVERALL
PERIPHERAL DIAMETER0.672 INCHES NOMINAL IN
COLORGREEN
CENTER HOLE DIAMETER0.594 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
D72574Reference document
Same NSN cross-reference
Reference document — Secondary reference
208820Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 72574?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72574?
72574 is a HOLDING TOOL,SPACER LOCKING BAIL.
What parts can replace 72574?
There are 2 known substitutes for 72574: D72574, 208820. Substitute compatibility should be verified for your specific system.
What is the NSN for 72574?
72574 is cataloged in the U.S. Government catalog under NSN 5330-00-064-7756. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72574