PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 725028-1
725028-1 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 12.0 DEGREES SECOND END, temp_rating: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B SECOND END, vacuum_in_torr: 50.8, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.188 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-835-3488, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
725028-1
NSN: 4720-00-835-3488
FSC: 4720
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
seat_angle12.0 DEGREES SECOND END
temp_rating-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B SECOND END
vacuum_in_torr50.8
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.188 INCHES NOMINAL IN
connection_styleSWIVEL NUT, FLARELESS SECOND END
outside_diameter0.312 INCHES NOMINAL IN
thread_directionRIGHT-HAND FIRST END
features_providedELECTROSTATIC DISCHARGE CAPABILITY AND NUTS DRILLED FOR LOCKWIRE
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure12000.0 POUNDS PER SQUARE INCH LBS
NSN4720-00-835-3488
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 725028-1 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION STYLE: SWIVEL NUT, FLARELESS SECOND END
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
MINIMUM INSIDE BENDING RADIUS: 2.000 INCHES IN
•
INSIDE DIAMETER: 0.188 INCHES NOMINAL IN
•
BURST TEST PRESSURE: 12000.0 POUNDS PER SQUARE INCH LBS
•
CONNECTION TYPE: THREADED INTERNAL TUBE SECOND END
•
TEMP RATING: -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
LAYER COMPOSITION AND LOCATION: OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
TECHNICAL CHARACTERISTICS (FLIS)
CONNECTION STYLESWIVEL NUT, FLARELESS SECOND END
CROSS-SECTIONAL SHAPE STYLEROUND
MINIMUM INSIDE BENDING RADIUS2.000 INCHES IN
INSIDE DIAMETER0.188 INCHES NOMINAL IN
BURST TEST PRESSURE12000.0 POUNDS PER SQUARE INCH LBS
CONNECTION TYPETHREADED INTERNAL TUBE SECOND END
TEMP RATING-65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE DEGF
LAYER COMPOSITION AND LOCATIONOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
SEAT ANGLE12.0 DEGREES FIRST END
CONNECTION STYLESWIVEL NUT, FLARELESS FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
95115Interchangeable
interchangeable cross-reference
interchangeable
95115-1Interchangeable
interchangeable cross-reference
interchangeable
92682Interchangeable
interchangeable cross-reference
interchangeable
506277Interchangeable
interchangeable cross-reference
interchangeable
5305PL0797165Interchangeable
interchangeable cross-reference
interchangeable
5305008465703Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 725028-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 725028-1?
725028-1 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 725028-1?
There are 13 known substitutes for 725028-1: 95115, 95115-1, 92682 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 725028-1?
725028-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-835-3488. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 725028-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026