PartsTable
Technical Data Sheet
Download PDF

724714 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

724714: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, overall_width: 0.626 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, aperture_width: 0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, overall_length: 2.704 INCHES MINIMUM AND 2.734 INCHES MAXIMUM IN, aperture_length: 2.454 INCHES MINIMUM AND 2.484 INCHES MAXIMUM IN, hardness_rating: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-855-8269, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
724714
NSN: 5330-00-855-8269
FSC: 5330 — Packing and Gasket Materials
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
overall_width0.626 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
aperture_width0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
overall_length2.704 INCHES MINIMUM AND 2.734 INCHES MAXIMUM IN
aperture_length2.454 INCHES MINIMUM AND 2.484 INCHES MAXIMUM IN
hardness_rating70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
inside_corner_radius0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
outside_corner_radius0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
cross-sectional_thickness0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-855-8269
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 724714 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
INSIDE CORNER RADIUS: 0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-25897,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
INSIDE CORNER RADIUS0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-25897,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH2.704 INCHES MINIMUM AND 2.734 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH0.626 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
APERTURE WIDTH0.376 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
SUBSTITUTES & CROSS-REFERENCES 1
690172Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 724714?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 724714?
724714 is a GASKET.
What parts can replace 724714?
There is 1 known substitute for 724714: 690172. Substitute compatibility should be verified for your specific system.
What is the NSN for 724714?
724714 is cataloged in the U.S. Government catalog under NSN 5330-00-855-8269. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 724714

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.