PartsTable
Technical Data Sheet
Download PDF

72451006PIECE5 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

72451006PIECE5: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK, nut_length: 0.603 INCHES NOMINAL IN, nut_diameter: 0.248 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-013-3927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72451006PIECE5
NSN: 5310-01-013-3927
FSC: 5310 — Nuts and Washers
CAGE: 34157 — AMENTUM SERVICES, INC. DBA AMENTUM SERVICES, INC DIV EG&G (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK
nut_length0.603 INCHES NOMINAL IN
nut_diameter0.248 INCHES NOMINAL IN
thread_class2B
head_diameter0.378 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
shank_end_typeCLOSED
thread_directionRIGHT-HAND
nominal_thread_size0.164 INCHES IN
head_countersink_angle100.0 DEGREES NOMINAL
NSN5310-01-013-3927
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 72451006PIECE5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.603 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HEAD COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
•
SHANK END TYPE: CLOSED
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
•
NUT DIAMETER: 0.248 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
NUT LENGTH0.603 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HEAD COUNTERSINK ANGLE100.0 DEGREES NOMINAL
SHANK END TYPECLOSED
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.248 INCHES NOMINAL IN
NUT STYLEBLIND RIVET W/SMOOTH ROUND SHANK
THREAD CLASS2B
SUBSTITUTES & CROSS-REFERENCES 1
58074-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 72451006PIECE5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72451006PIECE5?
72451006PIECE5 is a NUT,PLAIN,BLIND RIVET.
What parts can replace 72451006PIECE5?
There is 1 known substitute for 72451006PIECE5: 58074-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 72451006PIECE5?
72451006PIECE5 is cataloged in the U.S. Government catalog under NSN 5310-01-013-3927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72451006PIECE5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.