PartsTable
Technical Data Sheet
Download PDF

7245-27 — SPRING,HELICAL,COMPRESSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7245-27: SPRING,HELICAL,COMPRESSION.

The SPRING,HELICAL,COMPRESSION is a the manufacturer industrial component. Key specifications include material: NICKEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, inside_diameter: 0.403 INCHES MINIMUM AND 0.408 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, spring_free_length: 0.775 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN, coil_helix_direction: LEFT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-529-6515, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7245-27
NSN: 5330-00-529-6515
NIINs: 005296515, 012978443
FSC: 5330 — Packing and Gasket Materials
CAGE: 60029 — WOODWARD HRT, INC. DBA WOODWARD HRT INC (USA)
SPECIFICATIONS
materialNICKEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity8
inside_diameter0.403 INCHES MINIMUM AND 0.408 INCHES MAXIMUM IN
style_designatorCYLINDRICAL
spring_free_length0.775 INCHES MINIMUM AND 0.800 INCHES MAXIMUM IN
coil_helix_directionLEFT-HAND
spring_deflection_rate78.000 POUNDS PER INCH MINIMUM AND 82.000 POUNDS PER INCH MAXIMUM LBS
spring_free_outside_diameter0.559 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
material_document_and_classificationNI-SPAN-C,CAGE 99167 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-529-6515
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7245-27 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 1
9044-011NSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7245-27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7245-27?
7245-27 is a SPRING,HELICAL,COMPRESSION.
What parts can replace 7245-27?
There is 1 known substitute for 7245-27: 9044-011N. Substitute compatibility should be verified for your specific system.
What is the NSN for 7245-27?
7245-27 is cataloged in the U.S. Government catalog under NSN 5330-00-529-6515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7245-27