PartsTable
Technical Data Sheet
Download PDF

7244824P001 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7244824P001: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 400 OVERALL, first_end_style: CHAMFERED, second_end_style: SQUARE W/THRU HOLE, special_features: HOLE ON 2ND END IS THREADED 3/8-16 UNC-2B AND 1.000 IN. D IN, pin_overall_length: 11.500 INCHES NOMINAL IN, pin_overall_diameter: 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-253-0940, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7244824P001
NSN: 5315-01-253-0940
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 03538 — LOCKHEED MARTIN CORPORATION DIV RMS (USA)
SPECIFICATIONS
materialNICKEL ALLOY 400 OVERALL
first_end_styleCHAMFERED
second_end_styleSQUARE W/THRU HOLE
special_featuresHOLE ON 2ND END IS THREADED 3/8-16 UNC-2B AND 1.000 IN. D IN
pin_overall_length11.500 INCHES NOMINAL IN
pin_overall_diameter0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
material_document_and_classificationQQ-N-281 MONEL ALLOY 400,CLASS A,ROD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
reference_number_differentiating_characteristicsMAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION
NSN5315-01-253-0940
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7244824P001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 MONEL ALLOY 400,CLASS A,ROD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 11.500 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-281 MONEL ALLOY 400,CLASS A,ROD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN
PIN OVERALL LENGTH11.500 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SPECIAL FEATURESHOLE ON 2ND END IS THREADED 3/8-16 UNC-2B AND 1.000 IN. D IN
SECOND END STYLESQUARE W/THRU HOLE
MATERIALNICKEL ALLOY 400 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
7244824P1VMSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7244824P1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7244824P001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7244824P001?
7244824P001 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 7244824P001?
There are 2 known substitutes for 7244824P001: 7244824P1VM, 7244824P1. Substitute compatibility should be verified for your specific system.
What is the NSN for 7244824P001?
7244824P001 is cataloged in the U.S. Government catalog under NSN 5315-01-253-0940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7244824P001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.