7244218P1 — SPRING,HELICAL,TORSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

7244218P1: SPRING,HELICAL,TORSION.

The SPRING,HELICAL,TORSION is a the manufacturer industrial component. Key specifications include end_style: STRAIGHT BEND END (RIGHT) OVERALL, inside_diameter: 0.320 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN, style_designator: SINGLE TORSION LEFT HAND, surface_treatment: CADMIUM AND CHROMATE OVERALL, spring_free_length: 0.180 INCHES NOMINAL IN, coil_helix_direction: LEFT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5360-01-288-5872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7244218P1

NSN: 5360-01-288-5872
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 03538 — LOCKHEED MARTIN CORPORATION DIV RMS (USA)

SPECIFICATIONS

end_style	STRAIGHT BEND END (RIGHT) OVERALL
coil_quantity	2
inside_diameter	0.320 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
style_designator	SINGLE TORSION LEFT HAND
surface_treatment	CADMIUM AND CHROMATE OVERALL
spring_free_length	0.180 INCHES NOMINAL IN
coil_helix_direction	LEFT-HAND
end_angular_relationship	ENDS ANGLED ONE TO OTHER
spring_free_outside_diameter	0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
end_length_from_first_bend_to_second_bend_or_end	0.265 INCHES NOMINAL OVERALL IN
NSN	5360-01-288-5872

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN

•

END STYLE: STRAIGHT BEND END (RIGHT) OVERALL

•

STYLE DESIGNATOR: SINGLE TORSION LEFT HAND

•

SPRING FREE LENGTH: 0.180 INCHES NOMINAL IN

•

INSIDE DIAMETER: 0.320 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN

•

END LENGTH FROM FIRST BEND TO SECOND BEND OR END: 0.265 INCHES NOMINAL OVERALL IN

•

COIL QUANTITY: 2

•

SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.410 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
END STYLE	STRAIGHT BEND END (RIGHT) OVERALL
STYLE DESIGNATOR	SINGLE TORSION LEFT HAND
SPRING FREE LENGTH	0.180 INCHES NOMINAL IN
INSIDE DIAMETER	0.320 INCHES MINIMUM AND 0.350 INCHES MAXIMUM IN
END LENGTH FROM FIRST BEND TO SECOND BEND OR END	0.265 INCHES NOMINAL OVERALL IN
COIL QUANTITY	2
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
COIL HELIX DIRECTION	LEFT-HAND
END ANGULAR RELATIONSHIP	ENDS ANGLED ONE TO OTHER

OTHER ITEMS IN FSC 5360 — Coil, Flat, Leaf, and Wire Springs

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5360-00-001-1842 5360-00-001-1945 5360-00-001-2010 5360-00-001-3865 5360-00-001-3950 5360-00-001-4650 5360-00-001-4664 5360-00-001-4703

SUBSTITUTES & CROSS-REFERENCES 1

7244218P001Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 7244218P1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7244218P1?

7244218P1 is a SPRING,HELICAL,TORSION.

What parts can replace 7244218P1?

There is 1 known substitute for 7244218P1: 7244218P001. Substitute compatibility should be verified for your specific system.

What is the NSN for 7244218P1?

7244218P1 is cataloged in the U.S. Government catalog under NSN 5360-01-288-5872. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7244218P1 — SPRING,HELICAL,TORSION

Request a Quote — 7244218P1