PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 724-011-004
724-011-004 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC PACKING, construction: ONE-PIECE, outside_diameter: 0.562 INCHES NOMINAL IN, surface_treatment: CADMIUM RETAINER, retainer_thickness: 0.048 INCHES NOMINAL IN, packing_inside_diameter: 0.260 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-055-9231, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
724-011-004
NSN: 5330-01-055-9231
FSC: 5330
CAGE: 26055 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV FLUID SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC PACKING
constructionONE-PIECE
outside_diameter0.562 INCHES NOMINAL IN
surface_treatmentCADMIUM RETAINER
retainer_thickness0.048 INCHES NOMINAL IN
packing_inside_diameter0.260 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
packing_ring_cross-sectional_diameter0.064 INCHES NOMINAL IN
NSN5330-01-055-9231
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 724-011-004 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING RING CROSS-SECTIONAL DIAMETER: 0.064 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.562 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
PACKING INSIDE DIAMETER: 0.260 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM RETAINER
•
RETAINER THICKNESS: 0.048 INCHES NOMINAL IN
•
CONSTRUCTION: ONE-PIECE
TECHNICAL CHARACTERISTICS (FLIS)
PACKING RING CROSS-SECTIONAL DIAMETER0.064 INCHES NOMINAL IN
OUTSIDE DIAMETER0.562 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC PACKING
PACKING INSIDE DIAMETER0.260 INCHES MINIMUM AND 0.271 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM RETAINER
RETAINER THICKNESS0.048 INCHES NOMINAL IN
MATERIALSTEEL RETAINER
CONSTRUCTIONONE-PIECE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
2-711Interchangeable
interchangeable cross-reference
interchangeable
7500-00014Interchangeable
interchangeable cross-reference
interchangeable
33059Interchangeable
interchangeable cross-reference
interchangeable
YD311S1Interchangeable
interchangeable cross-reference
interchangeable
CFN41272Interchangeable
interchangeable cross-reference
interchangeable
A10804Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 724-011-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 724-011-004?
724-011-004 is a PACKING WITH RETAINER.
What parts can replace 724-011-004?
There are 21 known substitutes for 724-011-004: 2-711, 7500-00014, 33059 and 18 more. Substitute compatibility should be verified for your specific system.
Is 724-011-004 still available?
724-011-004 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 724-011-004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026