PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 723299-002
723299-002 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, overall_height: 0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN, outside_diameter: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN, surface_treatment: NICKEL OVERALL, material_thickness: 0.007 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-209-5606, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
723299-002
NSN: 5310-00-209-5606
FSC: 5310
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
overall_height0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
outside_diameter0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
surface_treatmentNICKEL OVERALL
material_thickness0.007 INCHES NOMINAL IN
NSN5310-00-209-5606
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 723299-002 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
OUTSIDE DIAMETER: 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.007 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
OVERALL HEIGHT0.026 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL OVERALL
OUTSIDE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
MATERIAL THICKNESS0.007 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
1WInterchangeable
interchangeable cross-reference
interchangeable
CInterchangeable
interchangeable cross-reference
interchangeable
S604Interchangeable
interchangeable cross-reference
interchangeable
MS35338-8Interchangeable
interchangeable cross-reference
interchangeable
40S33Interchangeable
interchangeable cross-reference
interchangeable
B107.18MInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 723299-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 723299-002?
723299-002 is a WASHER,SPRING TENSION.
What parts can replace 723299-002?
There are 22 known substitutes for 723299-002: 1W, C, S604 and 19 more. Substitute compatibility should be verified for your specific system.
Is 723299-002 still available?
723299-002 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 723299-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026