PartsTable
Technical Data Sheet
Download PDF

7232144 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7232144: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, end_radius: 1.000 INCHES NOMINAL IN, fork_depth: 1.000 INCHES NOMINAL IN, hole_shape: ROUND, hole_diameter: 0.755 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN, overall_width: 4.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-509-6063, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7232144
NSN: 5340-01-509-6063
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
end_radius1.000 INCHES NOMINAL IN
fork_depth1.000 INCHES NOMINAL IN
hole_shapeROUND
hole_diameter0.755 INCHES MINIMUM AND 0.765 INCHES MAXIMUM IN
overall_width4.000 INCHES NOMINAL IN
overall_height2.340 INCHES NOMINAL IN
fork_span_width1.597 INCHES MINIMUM AND 1.603 INCHES MAXIMUM IN
special_featuresTHE TWO PIVOT HOLES HAVE COUNTER BORE DIA OF 1.600 IN BY DEPTH OF 0.250 IN FROM OUTSIDE IN IN
style_designatorCLEVIS
surface_treatmentPAINT OVERALL
fork_arm_thickness1.200 INCHES NOMINAL IN
NSN5340-01-509-6063
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7232144 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 1.597 INCHES MINIMUM AND 1.603 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 1.200 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-1303 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 1.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
HOLE SHAPE: ROUND
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.340 INCHES NOMINAL IN
FORK SPAN WIDTH1.597 INCHES MINIMUM AND 1.603 INCHES MAXIMUM IN
FORK ARM THICKNESS1.200 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-STD-1303 MIL STD SINGLE TREATMENT RESPONSE OVERALL
END RADIUS1.000 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH4.000 INCHES NOMINAL IN
HOLE SHAPEROUND
SPECIAL FEATURESTHE TWO PIVOT HOLES HAVE COUNTER BORE DIA OF 1.600 IN BY DEPTH OF 0.250 IN FROM OUTSIDE IN IN
SURFACE TREATMENTPAINT OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7232144?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7232144?
7232144 is a CLEVIS,ROD END.
What is the NSN for 7232144?
7232144 is cataloged in the U.S. Government catalog under NSN 5340-01-509-6063. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7232144

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.