PartsTable
Technical Data Sheet
Download PDF

7232095 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7232095: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OR STEEL COMP 316, overall_width: 0.493 INCHES NOMINAL IN, overall_height: 1.218 INCHES NOMINAL IN, overall_length: 2.250 INCHES NOMINAL IN, special_features: TWO MOUNTING HOLES ARE ON OPPOSITE ENDS 0.250-20UNC;ALL DIMENSIONS APPLY AFTER COATING, surface_treatment: PASSIVATE OR OXIDE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-482-4998, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7232095
NSN: 5340-01-482-4998
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OR STEEL COMP 316
overall_width0.493 INCHES NOMINAL IN
overall_height1.218 INCHES NOMINAL IN
overall_length2.250 INCHES NOMINAL IN
special_featuresTWO MOUNTING HOLES ARE ON OPPOSITE ENDS 0.250-20UNC;ALL DIMENSIONS APPLY AFTER COATING
surface_treatmentPASSIVATE OR OXIDE
mounting_hole_typeTHREADED
mounting_hole_diameter0.278 INCHES NOMINAL IN
mounting_hole_quantity2
part_name_assigned_by_controlling_agencyAN/PEQ-2 ADAPTER BLOCK
surface_treatment_document_and_classificationMIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
NSN5340-01-482-4998
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7232095 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
MOUNTING HOLE DIAMETER: 0.278 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OR OXIDE
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
OVERALL HEIGHT1.218 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924, CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
MOUNTING HOLE DIAMETER0.278 INCHES NOMINAL IN
OVERALL LENGTH2.250 INCHES NOMINAL IN
OVERALL WIDTH0.493 INCHES NOMINAL IN
SPECIAL FEATURESTWO MOUNTING HOLES ARE ON OPPOSITE ENDS 0.250-20UNC;ALL DIMENSIONS APPLY AFTER COATING
SURFACE TREATMENTPASSIVATE OR OXIDE
PART NAME ASSIGNED BY CONTROLLING AGENCYAN/PEQ-2 ADAPTER BLOCK
MATERIALSTEEL COMP 304 OR STEEL COMP 316
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7232095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7232095?
7232095 is a BRACKET,MOUNTING.
What is the NSN for 7232095?
7232095 is cataloged in the U.S. Government catalog under NSN 5340-01-482-4998. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7232095

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.