PartsTable
Technical Data Sheet
Download PDF

7230014 — OSCILLATOR,CRYSTAL CONTROLLED

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

7230014: OSCILLATOR,CRYSTAL CONTROLLED.

The OSCILLATOR,CRYSTAL CONTROLLED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, body_style: TUBE TYPE, design_type: FRICTION, overall_length: 20.0 MILLIMETERS NOMINAL MM, overall_diameter: 5.0 MILLIMETERS NOMINAL MM, features_provided: NONRENEWABLE FUSIBLE ELEMENT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-141-6155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7230014
NSN: 5340-01-141-6155
NIINs: 011416155, 012246593, 014063461
FSC: 5340 — Hardware, Commercial
CAGE: 04577 — MISSION SYSTEMS ORCHARD PARK INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
body_styleTUBE TYPE
design_typeFRICTION
overall_length20.0 MILLIMETERS NOMINAL MM
overall_diameter5.0 MILLIMETERS NOMINAL MM
features_providedNONRENEWABLE FUSIBLE ELEMENT
surface_treatmentANODIZE
inside_diameter_length0.475 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
interruption_indicator_methodVISIBLE ELEMENT
maximum_voltage_rating_in_volts250.0 AC
continuous_current_rating_in_amps0.500
round_cap_outside_surface_conditionKNURLED
NSN5340-01-141-6155
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7230014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE
•
MATERIAL: ALUMINUM ALLOY
•
INSIDE DIAMETER LENGTH: 0.475 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: KNURLED
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER0.625 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
MATERIALALUMINUM ALLOY
INSIDE DIAMETER LENGTH0.475 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONKNURLED
SUBSTITUTES & CROSS-REFERENCES 2
8148650Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
CX37Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7230014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7230014?
7230014 is a OSCILLATOR,CRYSTAL CONTROLLED. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7230014?
There are 2 known substitutes for 7230014: 8148650, CX37. Substitute compatibility should be verified for your specific system.
What is the NSN for 7230014?
7230014 is cataloged in the U.S. Government catalog under NSN 5340-01-141-6155. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7230014