7226499 — CLAMP,LOOP

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

7226499: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND, slot_width: 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, slot_length: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, overall_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, special_features: ROLLED EDGE ON LOOP, style_designator: SINGLE LOOP. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-722-6499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7226499

NSN: 5340-00-722-6499
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

material	STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
slot_width	0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
slot_length	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
overall_width	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
special_features	ROLLED EDGE ON LOOP
style_designator	SINGLE LOOP
tongue_hole_type	OBLONG
material_thickness	0.026 INCHES NOMINAL IN
loop_inside_diameter	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end	0.813 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole	0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
NSN	5340-00-722-6499

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

MATERIAL THICKNESS: 0.026 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.813 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN

•

TONGUE HOLE TYPE: OBLONG

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN

•

MATERIAL: STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
OVERALL WIDTH	0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.026 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.813 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
SPECIAL FEATURES	ROLLED EDGE ON LOOP
TONGUE HOLE TYPE	OBLONG
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
MATERIAL	STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
SLOT WIDTH	0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SLOT LENGTH	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

170-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 7226499?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7226499?

7226499 is a CLAMP,LOOP.

What parts can replace 7226499?

There is 1 known substitute for 7226499: 170-3. Substitute compatibility should be verified for your specific system.

What is the NSN for 7226499?

7226499 is cataloged in the U.S. Government catalog under NSN 5340-00-722-6499. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7226499 — CLAMP,LOOP

Request a Quote — 7226499