PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7223-02
7223-02 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include color: BLACK BOTH SIDES, material: RUBBER CHLOROPRENE CLASS CR, special_features: RADIUS SHAPE IS SET AT 1.260 INNER DIAMETER AT 87 DEGREE, surface_condition: SMOOTH BOTH SIDES, fabrication_method: MOLDED, cross-sectional_width: 0.315 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-482-4440, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7223-02
NSN: 5330-01-482-4440
FSC: 5330
CAGE: 59991 — TECH RESOURCES, INC (USA)
SPECIFICATIONS
colorBLACK BOTH SIDES
materialRUBBER CHLOROPRENE CLASS CR
special_featuresRADIUS SHAPE IS SET AT 1.260 INNER DIAMETER AT 87 DEGREE
surface_conditionSMOOTH BOTH SIDES
fabrication_methodMOLDED
cross-sectional_width0.315 INCHES NOMINAL IN
cross-sectional_height0.315 INCHES NOMINAL IN
end_item_identificationALR69 TPS, AIRCRAFT
environmental_protectionWEATHER RESISTANT AND MOISTURE RESISTANT
cross-sectional_shape_styleSQUARE
nonmetallic_hardness_rating40.0 NOMINAL SHORE DUROMETER A
NSN5330-01-482-4440
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7223-02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR
•
CROSS-SECTIONAL WIDTH: 0.315 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.315 INCHES NOMINAL IN
•
ENVIRONMENTAL PROTECTION: WEATHER RESISTANT AND MOISTURE RESISTANT
•
COLOR: BLACK BOTH SIDES
•
FABRICATION METHOD: MOLDED
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESRADIUS SHAPE IS SET AT 1.260 INNER DIAMETER AT 87 DEGREE
MATERIALRUBBER CHLOROPRENE CLASS CR
CROSS-SECTIONAL WIDTH0.315 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.315 INCHES NOMINAL IN
ENVIRONMENTAL PROTECTIONWEATHER RESISTANT AND MOISTURE RESISTANT
COLORBLACK BOTH SIDES
END ITEM IDENTIFICATIONALR69 TPS, AIRCRAFT
FABRICATION METHODMOLDED
NONMETALLIC HARDNESS RATING40.0 NOMINAL SHORE DUROMETER A
SURFACE CONDITIONSMOOTH BOTH SIDES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
7223Interchangeable
interchangeable cross-reference
interchangeable
9819Interchangeable
interchangeable cross-reference
interchangeable
A42-7I137Interchangeable
interchangeable cross-reference
interchangeable
10300078Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-296 TY3SEBInterchangeable
interchangeable cross-reference
interchangeable
377 1/4-28 UNFInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7223-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7223-02?
7223-02 is a RUBBER STRIP.
What parts can replace 7223-02?
There are 12 known substitutes for 7223-02: 7223, 9819, A42-7I137 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7223-02?
7223-02 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-482-4440. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7223-02

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026