PartsTable
Technical Data Sheet
Download PDF

7222MTE160AT — PACKING ASSEMBLY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7222MTE160AT: PACKING ASSEMBLY.

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 0.297 INCHES NOMINAL IN, material: RUBBER SYNTHETIC SEPARATOR, joint_type: SCARF-PERIPHERAL TOP RING, inside_diameter: 1.481 INCHES NOMINAL IN, outside_diameter: 1.759 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL INTERMEDIATE RING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-495-5696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7222MTE160AT
NSN: 5330-00-495-5696
FSC: 5330 — Packing and Gasket Materials
CAGE: 72902 — PALMETTO INC (USA)
SPECIFICATIONS
height0.297 INCHES NOMINAL IN
materialRUBBER SYNTHETIC SEPARATOR
joint_typeSCARF-PERIPHERAL TOP RING
inside_diameter1.481 INCHES NOMINAL IN
outside_diameter1.759 INCHES NOMINAL IN
intermediate_ring_quantity1
cross-sectional_shape_styleSPECIAL INTERMEDIATE RING
NSN5330-00-495-5696
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7222MTE160AT MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERMEDIATE RING QUANTITY: 1
•
OUTSIDE DIAMETER: 1.759 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR BOTTOM RING
•
INSIDE DIAMETER: 1.481 INCHES NOMINAL IN
•
HEIGHT: 0.297 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEPARATOR
TECHNICAL CHARACTERISTICS
INTERMEDIATE RING QUANTITY1
OUTSIDE DIAMETER1.759 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR BOTTOM RING
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR TOP RING
CROSS-SECTIONAL SHAPE STYLESPECIAL INTERMEDIATE RING
INSIDE DIAMETER1.481 INCHES NOMINAL IN
HEIGHT0.297 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEPARATOR
JOINT TYPESCARF-PERIPHERAL TOP RING
JOINT TYPESCARF-PERIPHERAL BOTTOM RING
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
7222MTE160TSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GS570CL2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7222MTE160AT?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7222MTE160AT?
7222MTE160AT is a PACKING ASSEMBLY.
What parts can replace 7222MTE160AT?
There are 2 known substitutes for 7222MTE160AT: 7222MTE160T, GS570CL2. Substitute compatibility should be verified for your specific system.
What is the NSN for 7222MTE160AT?
7222MTE160AT is cataloged in the U.S. Government catalog under NSN 5330-00-495-5696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7222MTE160AT

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.