PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7222F6YITEM4
7222F6YITEM4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYPROPYLENE OVERALL, outside_diameter: 0.873 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN, style_designator: CIRCULAR, aperture_diameter: 0.625 INCHES NOMINAL IN, cross-sectional_thickness: 0.112 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-012-7346, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7222F6YITEM4
NSN: 5330-01-012-7346
FSC: 5330
CAGE: 28968 — CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. DBA HOKE GYROLOK (USA)
SPECIFICATIONS
materialPLASTIC POLYPROPYLENE OVERALL
outside_diameter0.873 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
style_designatorCIRCULAR
aperture_diameter0.625 INCHES NOMINAL IN
cross-sectional_thickness0.112 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-012-7346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7222F6YITEM4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL: PLASTIC POLYPROPYLENE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.112 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.873 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCIRCULAR
MATERIALPLASTIC POLYPROPYLENE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3651 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.112 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.873 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
APERTURE DIAMETER0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
17411Interchangeable
interchangeable cross-reference
interchangeable
F52NTE-202Interchangeable
interchangeable cross-reference
interchangeable
905275Interchangeable
interchangeable cross-reference
interchangeable
1395350Interchangeable
interchangeable cross-reference
interchangeable
62380905.275Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7222F6YITEM4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7222F6YITEM4?
7222F6YITEM4 is a GASKET.
What parts can replace 7222F6YITEM4?
There are 5 known substitutes for 7222F6YITEM4: 17411, F52NTE-202, 905275 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7222F6YITEM4?
7222F6YITEM4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-012-7346. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7222F6YITEM4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026