PartsTable
Technical Data Sheet
Download PDF

7214W2 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7214W2: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 70.0 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 24.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-289-6803, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7214W2
NSN: 3110-00-289-6803
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter70.0 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width24.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
inner_ring_width0.9048 INCHES NOMINAL IN
outer_ring_width0.9048 INCHES NOMINAL IN
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter125.0 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
NSN3110-00-289-6803
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7214W2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
OUTER RING WIDTH: 0.9048 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 125.0 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
OUTER RING WIDTH0.9048 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
OVERALL WIDTH24.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER125.0 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
CONTACT ANGLE25.0 DEGREES MAXIMUM
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SUBSTITUTES & CROSS-REFERENCES 1
H20214AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 7214W2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7214W2?
7214W2 is a BEARING,BALL,ANNULAR.
What parts can replace 7214W2?
There is 1 known substitute for 7214W2: H20214A. Substitute compatibility should be verified for your specific system.
What is the NSN for 7214W2?
7214W2 is cataloged in the U.S. Government catalog under NSN 3110-00-289-6803. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7214W2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.