PartsTable
Technical Data Sheet
Download PDF

72118 — TUBING,PLASTIC,SPIRAL WRAP

✓ Government record, cited
Kensington · ORING SEAL
PRODUCT OVERVIEW

72118: TUBING,PLASTIC,SPIRAL WRAP.

The stylish alternative for laptop computer users. The Kensington® PocketMouse™ SE is the stylish alternative for busy travelers. Get the comfort and convenience of using a desktop mouse -- instead of the hassle of using your notebook's touchpad or pointing stick.

This part is cataloged in the U.S. Government catalog under NSN 5331-00-129-9335, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72118
NSN: 5331-00-129-9335
NIINs: 001299335, 002293944, 005176230, 011102701, 013040966
FSC: 5331 — O-ring
CAGE: 96105 — FUNK MFG CO SUB OF DEERE AND CO (USA)
SPECIFICATIONS
length100.000 FEET NOMINAL FT
materialPLASTIC, POLYETHYLENE (PP) PLASTIC
color_codingBLACK
wall_thickness0.0450 INCHES NOMINAL IN
inside_diameter0.160 INCHES NOMINAL IN
special_featuresULTRAVIOLET RESISTANT FOR OUTDOOR USE
bundle_diameter_range+0.188 TO 2.000 INCHES IN
color_coding/special_markingsINCLUDED
quantity_within_each_unit_package100.000 FEET FT
NSN5331-00-129-9335
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 72118 MFR: Kensington ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.856 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.856 INCHES MINIMUM AND 0.869 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 4
E680704Reference document
Same NSN cross-reference
Reference document — Secondary reference
00510262Reference document
Same NSN cross-reference
Reference document — Secondary reference
F37020-118Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
624VLD598CMReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
Manufacturer release date (catalog record)2018-07-01
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 72118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72118?
72118 is a TUBING,PLASTIC,SPIRAL WRAP manufactured by Kensington.
What parts can replace 72118?
There are 4 known substitutes for 72118: E680704, 00510262, F37020-118 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 72118?
72118 is cataloged in the U.S. Government catalog under NSN 5331-00-129-9335. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72118