The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include cut_type: RECTANGULAR OVERALL, material: RUBBER CHLOROPRENE CLASS CR OVERALL, joint_type: BUTT OVERALL, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, special_features: VULCANIZED JOINT SHALL HAVE A MINIMUM TENSIL STRENGTH OF 300 PSI, center_hole_diameter: 83.500 INCHES MINIMUM AND 84.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5330-01-547-0484, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
721-7385444-7
NSN:5330-01-547-0484 FSC:5330 — Packing and Gasket Materials CAGE:53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
cut_type
RECTANGULAR OVERALL
material
RUBBER CHLOROPRENE CLASS CR OVERALL
joint_type
BUTT OVERALL
joint_quantity
1
hardness_rating
65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
special_features
VULCANIZED JOINT SHALL HAVE A MINIMUM TENSIL STRENGTH OF 300 PSI
center_hole_diameter
83.500 INCHES MINIMUM AND 84.500 INCHES MAXIMUM IN
end_item_identification
OHIO CLASS SSBN (TRIDENT)
cross-sectional_shape_style
O-RING
cross_section_outside_diameter
0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
material_document_and_classification
MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN
5330-01-547-0484
COMPONENT DIAGRAM
KEY FEATURES
•
JOINT QUANTITY: 1
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CUT TYPE: RECTANGULAR OVERALL
•
CENTER HOLE DIAMETER: 83.500 INCHES MINIMUM AND 84.500 INCHES MAXIMUM IN
•
CROSS SECTION OUTSIDE DIAMETER: 0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
JOINT QUANTITY
1
HARDNESS RATING
65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-R-3065 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLE
O-RING
CUT TYPE
RECTANGULAR OVERALL
SPECIAL FEATURES
VULCANIZED JOINT SHALL HAVE A MINIMUM TENSIL STRENGTH OF 300 PSI
CENTER HOLE DIAMETER
83.500 INCHES MINIMUM AND 84.500 INCHES MAXIMUM IN
CROSS SECTION OUTSIDE DIAMETER
0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
END ITEM IDENTIFICATION
OHIO CLASS SSBN (TRIDENT)
MATERIAL
RUBBER CHLOROPRENE CLASS CR OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 721-7385444-7?
721-7385444-7 is a PACKING,PREFORMED.
What parts can replace 721-7385444-7?
There are 2 known substitutes for 721-7385444-7: 54-35-0015, 3227009 ITEM 2. Substitute compatibility should be verified for your specific system.
What is the NSN for 721-7385444-7?
721-7385444-7 is cataloged in the U.S. Government catalog under NSN 5330-01-547-0484. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.