PartsTable
Technical Data Sheet
Download PDF

721-7069909-45 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

721-7069909-45: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 3.618 INCHES MINIMUM AND 3.622 INCHES MAXIMUM IN, center_hole_diameter: 3.250 INCHES NOMINAL IN, distance_between_ends: 0.093 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-171-5778, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
721-7069909-45
NSN: 5330-00-171-5778
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
angle25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-BUTT RETAINER
peripheral_diameter3.618 INCHES MINIMUM AND 3.622 INCHES MAXIMUM IN
center_hole_diameter3.250 INCHES NOMINAL IN
distance_between_ends0.093 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
cross-sectional_height0.093 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
cross-sectional_thickness0.031 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE
material_document_and_classificationMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-171-5778
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 721-7069909-45 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.093 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
PERIPHERAL DIAMETER: 3.618 INCHES MINIMUM AND 3.622 INCHES MAXIMUM IN
•
DISTANCE BETWEEN ENDS: 0.093 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.093 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
PERIPHERAL DIAMETER3.618 INCHES MINIMUM AND 3.622 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS0.093 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-BUTT RETAINER
SUBSTITUTES & CROSS-REFERENCES 7
SAE-AS8791Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS27872-42Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS28782-42Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
H861-1505-45Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS28782Reference document
Same NSN cross-reference
Reference document — Identification reference
25573PC21Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 721-7069909-45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 721-7069909-45?
721-7069909-45 is a RETAINER,PACKING.
What parts can replace 721-7069909-45?
There are 7 known substitutes for 721-7069909-45: SAE-AS8791, MS27872-42, MS28782-42 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 721-7069909-45?
721-7069909-45 is cataloged in the U.S. Government catalog under NSN 5330-00-171-5778. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 721-7069909-45

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.