PartsTable
Technical Data Sheet
Download PDF

721-7068584-10 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

721-7068584-10: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 2.700 INCHES NOMINAL IN, length: 0.070 INCHES NOMINAL IN, material: COPPER ALLOY OVERALL, hole_diameter: 0.280 INCHES NOMINAL IN, smallest_width: 0.800 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-487-0743, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
721-7068584-10
NSN: 5340-01-487-0743
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width2.700 INCHES NOMINAL IN
length0.070 INCHES NOMINAL IN
materialCOPPER ALLOY OVERALL
hole_diameter0.280 INCHES NOMINAL IN
smallest_width0.800 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
style_designatorSTANDOFF
material_thickness0.062 INCHES NOMINAL IN
end_item_identificationUSED ON LOS ANGELES CLASS SSN
mounting_facility_diameter0.280 INCHES NOMINAL IN
mounting_facility_quantity2
distance_from_loop_center_to_end2.120 INCHES NOMINAL IN
NSN5340-01-487-0743
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 721-7068584-10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.280 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
LENGTH: 0.070 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: STANDOFF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-201 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SMALLEST WIDTH: 0.800 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.280 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
LENGTH0.070 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
STYLE DESIGNATORSTANDOFF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-N-201 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SMALLEST WIDTH0.800 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END2.120 INCHES NOMINAL IN
WIDTH2.700 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
7068584Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 721-7068584-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 721-7068584-10?
721-7068584-10 is a CLIP,SPRING TENSION.
What parts can replace 721-7068584-10?
There is 1 known substitute for 721-7068584-10: 7068584. Substitute compatibility should be verified for your specific system.
What is the NSN for 721-7068584-10?
721-7068584-10 is cataloged in the U.S. Government catalog under NSN 5340-01-487-0743. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 721-7068584-10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.