PartsTable
Technical Data Sheet
Download PDF

7209D106F — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7209D106F: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_diameter: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN, overall_width: 1.4911 INCHES MINIMUM AND 1.4961 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND, style_designator: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-112-2947, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7209D106F
NSN: 3110-00-112-2947
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
bore_diameter1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
overall_width1.4911 INCHES MINIMUM AND 1.4961 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
bearing_preload_rating11.0 POUNDS NOMINAL LBS
overall_outside_diameter3.3462 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
standard_tolerance_designationABEC NO.5
NSN3110-00-112-2947
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7209D106F · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING PRELOAD RATING: 11.0 POUNDS NOMINAL LBS
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
•
OVERALL OUTSIDE DIAMETER: 3.3462 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
BORE DIAMETER: 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
BEARING PRELOAD RATING11.0 POUNDS NOMINAL LBS
SURFACE FINISHGROUND
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, FACE TO FACE MOUNTING
OVERALL WIDTH1.4911 INCHES MINIMUM AND 1.4961 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER3.3462 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM IN
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.5
BORE DIAMETER1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM IN
MATERIALSTEEL COMP E52100 BALL
MATERIALCOPPER ALLOY RETAINER
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
9600M76P04Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
3110PL0885419Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7209D106F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7209D106F?
7209D106F is a BEARING,BALL,DUPLEX.
What parts can replace 7209D106F?
There are 2 known substitutes for 7209D106F: 9600M76P04, 3110PL0885419. Substitute compatibility should be verified for your specific system.
What is the NSN for 7209D106F?
7209D106F is cataloged in the U.S. Government catalog under NSN 3110-00-112-2947. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7209D106F

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.