PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7206B
7206B ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: BRASS AND CRES MATERIAL;CONSISTS OF ONE FLANGE ONE TEE AND THREE PIECES OF PIPE 1.050 IN. OD 0.075 IN.

WALL THICKNESS IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8018, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7206B
NSN: 3110-00-156-8018
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
general_characteristics_item_descriptionBRASS AND CRES MATERIAL;CONSISTS OF ONE FLANGE ONE TEE AND THREE PIECES OF PIPE 1.050 IN. OD 0.075 IN. WALL THICKNESS IN
NSN3110-00-156-8018
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7206B · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONTACT ANGLE: 25.0 DEGREES MINIMUM
•
MATERIAL: STEEL BALL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE DIAMETER: 30.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CONTACT ANGLE25.0 DEGREES MINIMUM
MATERIALSTEEL BALL
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER30.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
100870Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
interchangeable cross-reference
interchangeable
7206Interchangeable
interchangeable cross-reference
interchangeable
922-0585-020Interchangeable
interchangeable cross-reference
interchangeable
MH13Interchangeable
interchangeable cross-reference
interchangeable
105F143Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7206B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7206B?
7206B is a BEARING,BALL,ANNULAR.
What parts can replace 7206B?
There are 27 known substitutes for 7206B: 100870, FFS92, 7206 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7206B?
7206B is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8018. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7206B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026