PartsTable
Technical Data Sheet
Download PDF

72062-4TYB — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

72062-4TYB: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: STEEL SPRING, seal_width: 1.062 INCHES NOMINAL IN, construction: TWO-PIECE, housing_bore_diameter: 32.775 INCHES MINIMUM AND 32.785 INCHES MAXIMUM IN, accommodated_shaft_diameter: 30.746 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-605-2511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72062-4TYB
NSN: 5330-00-605-2511
FSC: 5330 — Packing and Gasket Materials
CAGE: 70508 — AMERICAN METAL BEARING CO DBA AMB ENGINEERING & MACHINING SOLUTIONS (USA)
SPECIFICATIONS
materialSTEEL SPRING
seal_width1.062 INCHES NOMINAL IN
constructionTWO-PIECE
housing_bore_diameter32.775 INCHES MINIMUM AND 32.785 INCHES MAXIMUM IN
accommodated_shaft_diameter30.746 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-605-2511
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 72062-4TYB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 1.062 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 32.775 INCHES MINIMUM AND 32.785 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 30.746 INCHES NOMINAL IN
•
MATERIAL: STEEL SPRING
•
CONSTRUCTION: TWO-PIECE
TECHNICAL CHARACTERISTICS
SEAL WIDTH1.062 INCHES NOMINAL IN
HOUSING BORE DIAMETER32.775 INCHES MINIMUM AND 32.785 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER30.746 INCHES NOMINAL IN
MATERIALSTEEL SPRING
MATERIALRUBBER SEALING ELEMENT
CONSTRUCTIONTWO-PIECE
SUBSTITUTES & CROSS-REFERENCES 1
76100Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 72062-4TYB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72062-4TYB?
72062-4TYB is a SEAL,PLAIN.
What parts can replace 72062-4TYB?
There is 1 known substitute for 72062-4TYB: 76100. Substitute compatibility should be verified for your specific system.
What is the NSN for 72062-4TYB?
72062-4TYB is cataloged in the U.S. Government catalog under NSN 5330-00-605-2511. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72062-4TYB

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.