PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7205P6
7205P6 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 1.0000 INCHES NOMINAL IN, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 15.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-776-0669, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7205P6
NSN: 3110-00-776-0669
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter1.0000 INCHES NOMINAL IN
contact_angle25.0 DEGREES MINIMUM
overall_width15.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter52.00 MILLIMETERS NOMINAL MM
retainer_fabrication_methodMACHINED
standard_tolerance_designationABEC NO.1
NSN3110-00-776-0669
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7205P6 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 1.0000 INCHES NOMINAL IN
•
MATERIAL: STEEL BALL
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
RETAINER FABRICATION METHOD: MACHINED
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER1.0000 INCHES NOMINAL IN
MATERIALSTEEL BALL
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALCOPPER ALLOY RETAINER
RETAINER FABRICATION METHODMACHINED
OVERALL WIDTH15.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
16787Interchangeable
interchangeable cross-reference
interchangeable
BX53Interchangeable
interchangeable cross-reference
interchangeable
400-512-096Interchangeable
interchangeable cross-reference
interchangeable
CB2435Interchangeable
interchangeable cross-reference
interchangeable
882177Interchangeable
interchangeable cross-reference
interchangeable
A754X4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7205P6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7205P6?
7205P6 is a BEARING,BALL,ANNULAR.
What parts can replace 7205P6?
There are 6 known substitutes for 7205P6: 16787, BX53, 400-512-096 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7205P6?
7205P6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-776-0669. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7205P6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026