PartsTable
Technical Data Sheet
Download PDF

7205DB — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

7205DB: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 30.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-6784, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7205DB
NSN: 3110-00-156-6784
NIINs: 001566784, 001568008
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 43491 — GENERAL SIGNAL CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter25.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width30.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
special_featuresPAIR OF BEARINGS,DUPLEX MTD BACK-TO-BACK
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
lubrication_materialLUBRICANT
overall_outside_diameter52.00 MILLIMETERS NOMINAL MM
bearing_preload_designationLIGHT
NSN3110-00-156-6784
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7205DB · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
•
OVERALL OUTSIDE DIAMETER: 52.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
BEARING PRELOAD DESIGNATIONLIGHT
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
OVERALL WIDTH30.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER25.00 MILLIMETERS NOMINAL MM
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
D54-249PC349Reference document
Same NSN cross-reference
Reference document — Secondary reference
20205DBReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
20205DBL1AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D54-220PC349Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7205DB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7205DB?
7205DB is a BEARING,BALL,ANNULAR.
What parts can replace 7205DB?
There are 4 known substitutes for 7205DB: D54-249PC349, 20205DB, 20205DBL1A and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7205DB?
7205DB is cataloged in the U.S. Government catalog under NSN 3110-00-156-6784. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7205DB