PartsTable
Technical Data Sheet
Download PDF

720563 — ELBOW,PIPE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

720563: ELBOW,PIPE.

The ELBOW,PIPE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OR STEEL COMP 302, hole_diameter: 0.220 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, overall_width: 4.680 INCHES MINIMUM AND 4.710 INCHES MAXIMUM IN, inverted_radius: 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR W/APERTURE, aperture_diameter: 3.840 INCHES MINIMUM AND 3.860 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-278-4285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
720563
NSN: 4730-00-278-4285
NIINs: 002784285, 008941878
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 00447 — WABCO CONSTRUCTION AND MINING EQUIPMENT GROUP INDIANAPOLIS PLANT AN AMERICAN STANDARD INC CO (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OR STEEL COMP 302
hole_diameter0.220 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
overall_width4.680 INCHES MINIMUM AND 4.710 INCHES MAXIMUM IN
inverted_radius0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR W/APERTURE
aperture_diameter3.840 INCHES MINIMUM AND 3.860 INCHES MAXIMUM IN
bolt_hole_quantity6
bolt_circle_diameter4.240 INCHES MINIMUM AND 4.260 INCHES MAXIMUM IN
outside_corner_radius0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
side_radius_from_gasket_center1.920 INCHES MINIMUM AND 1.930 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES
NSN4730-00-278-4285
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 720563 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLOW ANGLE: 45.0 DEGREES
•
NOMINAL PIPE SIZE ACCOMMODATED: 0.750 INCHES SECOND END IN
•
CONNECTION STYLE: PLAIN (PIPE) FIRST END
•
CONNECTION TYPE: THREADED INTERNAL PIPE FIRST END
•
OPERATING PRESSURE: 300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS
FLOW ANGLE45.0 DEGREES
NOMINAL PIPE SIZE ACCOMMODATED0.750 INCHES SECOND END IN
NOMINAL PIPE SIZE ACCOMMODATED0.750 INCHES FIRST END IN
CONNECTION STYLEPLAIN (PIPE) FIRST END
CONNECTION STYLEPLAIN (PIPE) SECOND END
CONNECTION TYPETHREADED INTERNAL PIPE FIRST END
CONNECTION TYPETHREADED EXTERNAL PIPE SECOND END
OPERATING PRESSURE300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
LEG LENGTH0.980 INCHES NOMINAL FIRST END IN
LEG LENGTH1.290 INCHES NOMINAL SECOND END IN
SUBSTITUTES & CROSS-REFERENCES 5
140798Reference document
Same NSN cross-reference
Reference document — Secondary reference
WWP521Reference document
Same NSN cross-reference
Reference document — Identification reference
ASME B16.3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
ELL781Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
S-969-ESame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 720563?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 720563?
720563 is a ELBOW,PIPE.
What parts can replace 720563?
There are 5 known substitutes for 720563: 140798, WWP521, ASME B16.3 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 720563?
720563 is cataloged in the U.S. Government catalog under NSN 4730-00-278-4285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 720563