PartsTable
Technical Data Sheet

72001/4 — RELAY,ELECTROMAGNETIC

✓ Government record, cited
3M · COMPONENT
PRODUCT OVERVIEW

72001/4: RELAY,ELECTROMAGNETIC.

These 3M™ Premium Black Floor Pads are standard of the industry, for wet stripping of old soiled floor finishes or heavy duty cleaning. The blend of fibres increases friction on floors effectively removing floor finish, black marks and stains. Also used for heavy duty cleaning on concrete and industrial floors.

Consistent proven performance with long pad life. 3M™ Black Stripper Pads 7200 , the industry standard against which all other stripping pads are measured, provide nearly 40 percent greater initial cut than competitors and offer high performance throughout the life of the pad. Coarse fibers and abrasives provide aggressive stripping performance, removing two to three layers of old finish.

The web of fibers is permeated throughout with a uniform coating of resin and abrasive mineral particles, consistently delivering impressive cut over the life of the pad. The pad’s open-textured, non-woven construction resists clogging, allowing stripping solutions to flow through the pa This part is cataloged in the U.S. Government catalog under NSN 5945-00-411-3690, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
72001/4
NSN: 5945-00-411-3690
NIINs: 004113690, 016132816, 016810724
FSC: 5945 — Relays and Solenoids
CAGE: 80249 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
materialPLASTIC LENS
quantity1
duty_typeCONTINUOUS
microphoneINCLUDED
filter_typeCANISTER
coil_quantity1
overall_width0.500 INCHES NOMINAL IN
overall_height0.230 INCHES NOMINAL IN
overall_length0.590 INCHES NOMINAL IN
face_cover_typeFACEPIECE
size_designationMEDIUM
winding_quantity1
NSN5945-00-411-3690
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: 3M RELAY,ELECTROMAGNETIC TITLE COMPONENT PN 72001/4 MFR 3M RELAY,ELECTROMAGNETIC
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 1 PLUG-IN TERMINAL(S) SINGLE MOUNTING FACILITY
•
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS: 28.0 AC
•
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE: 200.0 MILLIAMPERES AC RESISTIVE LOAD
•
DUTY TYPE: CONTINUOUS
•
WINDING DC RESISTANCE RATING: 440.0 OHMS NOMINAL SINGLE WINDING
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY TYPE AND QUANTITY1 PLUG-IN TERMINAL(S) SINGLE MOUNTING FACILITY
OVERALL HEIGHT0.230 INCHES NOMINAL IN
MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS28.0 AC
MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE200.0 MILLIAMPERES AC RESISTIVE LOAD
DUTY TYPECONTINUOUS
OVERALL LENGTH0.590 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
WINDING DC RESISTANCE RATING440.0 OHMS NOMINAL SINGLE WINDING
COIL QUANTITY1
ENVIRONMENTAL PROTECTIONHERMETIC
SUBSTITUTES & CROSS-REFERENCES 2
JRA2C12BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BR10S127Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 72001/4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72001/4?
72001/4 is a RELAY,ELECTROMAGNETIC manufactured by 3M.
What parts can replace 72001/4?
There are 2 known substitutes for 72001/4: JRA2C12B, BR10S127. Substitute compatibility should be verified for your specific system.
What is the NSN for 72001/4?
72001/4 is cataloged in the U.S. Government catalog under NSN 5945-00-411-3690. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72001/4