Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: PAPER AND RUBBER SYNTHETIC OVERALL, body_width: 4.250 INCHES NOMINAL IN, body_height: 5.000 INCHES NOMINAL IN, body_length: 0.138 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN, hole_diameter: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.438 INCHES NOMINAL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-140-2187, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
720-08
NSN:5330-00-140-2187 FSC:5330 CAGE:24930 — L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
material
PAPER AND RUBBER SYNTHETIC OVERALL
body_width
4.250 INCHES NOMINAL IN
body_height
5.000 INCHES NOMINAL IN
body_length
0.138 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
hole_diameter
0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
4.438 INCHES NOMINAL IN
rating_method
ELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity
16 SINGLE COMPONENT SINGLE WINDING
aperture_width
3.688 INCHES NOMINAL IN
coil_form_type
SOLID SINGLE COMPONENT
inclosure_type
OPEN
overall_length
6.438 INCHES NOMINAL IN
NSN
5330-00-140-2187
COMPONENT DIAGRAM
KEY FEATURES
•
HOLE DIAMETER: 0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96,CL A FED SPEC ALL MATERIAL RESPONSES OVERALL
•
BOLT HOLE QUANTITY: 4
•
MATERIAL: PAPER AND RUBBER SYNTHETIC OVERALL
•
OUTSIDE CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
APERTURE LENGTH: 4.281 INCHES NOMINAL IN
•
APERTURE WIDTH: 3.688 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER
0.219 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIAL DOCUMENT AND CLASSIFICATION
HH-P-96,CL A FED SPEC ALL MATERIAL RESPONSES OVERALL
BOLT HOLE QUANTITY
4
MATERIAL
PAPER AND RUBBER SYNTHETIC OVERALL
OUTSIDE CORNER RADIUS
0.250 INCHES NOMINAL IN
APERTURE LENGTH
4.281 INCHES NOMINAL IN
APERTURE WIDTH
3.688 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH
0.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
3.922 INCHES MINIMUM AND 3.954 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
4.515 INCHES MINIMUM AND 4.547 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 720-08?
720-08 is a COIL,RADIO FREQUENCY.
What parts can replace 720-08?
There are 14 known substitutes for 720-08: 01-442, 63357-001, NRA2-050A-TFD-800 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 720-08?
720-08 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-140-2187. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.