PartsTable
Technical Data Sheet
PartsTable / MRO / 72-7-5
72-7-5 ✓ Verified by PartsTable
PanzerGlass · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Protect your phone from the hazards of everyday life with PanzerGlass®. Accidental bumps against sharp-edged dangers in your pocket or crushing falls onto stone-hard pavements are no match for this scratch and shock-resistant screen protector. It even has a smudge-free coating with antibacterial effect that reduces traces of fingerprints and kills up to 99.99% of all common surface bacteria.

The screen protector is easy to apply and once installed, you’ll never again fear the sight of your phone tumbling to the ground. This may never happen, but if it does, you’ll regret not having clicked “add to cart”.<br><br>The Edge-to-Edge screen protector covers the entire front surface of your phone, while leaving room for a case. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4369, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 72-7-5
NSN: 3110-00-120-4369
FSC: 3110
CAGE: 87969 — TWENTIETH CENTURY ELECTRICAL SALES CORP
SPECIFICATIONS
colorBLACK
width6.000 INCHES NOMINAL IN
length16.000 INCHES NOMINAL IN
materialASBESTOS OVERALL
thickness1.000 INCHES NOMINAL IN
body_stylePISTON
body_width2.020 INCHES MAXIMUM IN
head_styleHEXAGON
shaft_typeROUND, FLATTED SINGLE ACTUATOR
shell_typeSOLID
body_height2.840 INCHES MAXIMUM IN
body_length0.185 INCHES NOMINAL IN
NSN3110-00-120-4369
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 72-7-5 · PanzerGlass ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
OVERALL OUTSIDE DIAMETER: 2.0625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
•
BORE DIAMETER: 1.2500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
ALIGNMENT TYPERIGID
OVERALL WIDTH1.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
OVERALL OUTSIDE DIAMETER2.0625 INCHES NOMINAL IN
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, HARDENED AND GROUND
BORE DIAMETER1.2500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
187-85Interchangeable
interchangeable cross-reference
interchangeable
60-23-9652Interchangeable
interchangeable cross-reference
interchangeable
245205Interchangeable
interchangeable cross-reference
interchangeable
787-24-02-004Interchangeable
interchangeable cross-reference
interchangeable
215-36320-1Interchangeable
interchangeable cross-reference
interchangeable
8264-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 72-7-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72-7-5?
72-7-5 is a CAPACITOR,VARIABLE,CERAMIC DIELE manufactured by PanzerGlass. It is classified as a MRO (MRO_GENERAL).
What parts can replace 72-7-5?
There are 21 known substitutes for 72-7-5: 187-85, 60-23-9652, 245205 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 72-7-5?
72-7-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-120-4369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72-7-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026