PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 72-6970-960
72-6970-960 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,PAPER DIELECTRIC. Key specifications include material: STEEL BALL, alignment_type: RIGID, overall_height: 16.0 MILLIMETERS NOMINAL MM, surface_finish: GROUND, style_designator: GROOVED RACE SURFACE, bore_smallest_diameter: 25.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72-6970-960
NSN: 3110-00-156-1862
FSC: 3110
CAGE: 50024 — COLTEC INDUSTRIES INC DBA FAIRBANKS MORSE ENGINE FM/ALCO (USA)
SPECIFICATIONS
materialSTEEL BALL
alignment_typeRIGID
overall_height16.0 MILLIMETERS NOMINAL MM
surface_finishGROUND
style_designatorGROOVED RACE SURFACE
bore_smallest_diameter25.0 MILLIMETERS NOMINAL MM
overall_outside_diameter52.0 MILLIMETERS NOMINAL MM
standard_tolerance_designationAFBMA STD TOLERANCE FOR THRUST BEARINGS
thrust_directional_capability_designationSINGLE
NSN3110-00-156-1862
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 72-6970-960 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 52.0 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL WASHER
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL HEIGHT16.0 MILLIMETERS NOMINAL MM
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER52.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL WASHER
MATERIALSTEEL BALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
STYLE DESIGNATORGROOVED RACE SURFACE
BORE SMALLEST DIAMETER25.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
3905Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-905Interchangeable
interchangeable cross-reference
interchangeable
924284C1Interchangeable
interchangeable cross-reference
interchangeable
5715MKInterchangeable
interchangeable cross-reference
interchangeable
F400E00303Interchangeable
interchangeable cross-reference
interchangeable
F400E303Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 72-6970-960?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72-6970-960?
72-6970-960 is a CAPACITOR,FIXED,PAPER DIELECTRIC.
What parts can replace 72-6970-960?
There are 20 known substitutes for 72-6970-960: 3905, M83248/1-905, 924284C1 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 72-6970-960?
72-6970-960 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72-6970-960

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026