PartsTable
Technical Data Sheet
Download PDF

72-519 — SEMICONDUCTOR DEVICE,THYRISTOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

72-519: SEMICONDUCTOR DEVICE,THYRISTOR.

The SEMICONDUCTOR DEVICE,THYRISTOR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 24, overall_width: 0.880 INCHES NOMINAL IN, overall_length: 1.735 INCHES MAXIMUM IN, inside_diameter: 0.265 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-049-0689, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72-519
NSN: 5340-01-049-0689
NIINs: 010490689, 011200579, 012196427, 015848028
FSC: 5340 — Hardware, Commercial
CAGE: 30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity24
overall_width0.880 INCHES NOMINAL IN
overall_length1.735 INCHES MAXIMUM IN
inside_diameter0.265 INCHES NOMINAL IN
mounting_methodTHREADED STUD(S)
special_featuresCONTAINS NUMEROUS CRITICAL FEATURES
style_designatorCYLINDRICAL
features_providedHERMETICALLY SEALED CASE
surface_treatmentZINC
material_thickness0.0359 INCHES NOMINAL IN
NSN5340-01-049-0689
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 72-519 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325 FED SPEC SINGLE TREATMENT RESPONSE
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.279 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.0359 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-Z-325 FED SPEC SINGLE TREATMENT RESPONSE
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A366 ASSN STD SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.279 INCHES MINIMUM AND 0.287 INCHES MAXIMUM IN
OVERALL LENGTH2.320 INCHES MINIMUM AND 2.440 INCHES MAXIMUM IN
OVERALL WIDTH0.880 INCHES NOMINAL IN
MATERIAL THICKNESS0.0359 INCHES NOMINAL IN
SPECIAL FEATURESTWO MTG HOLES 1.750 IN. C TO C IN
SURFACE TREATMENTZINC
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 1
232-2176Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 72-519?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72-519?
72-519 is a SEMICONDUCTOR DEVICE,THYRISTOR.
What parts can replace 72-519?
There is 1 known substitute for 72-519: 232-2176. Substitute compatibility should be verified for your specific system.
What is the NSN for 72-519?
72-519 is cataloged in the U.S. Government catalog under NSN 5340-01-049-0689. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72-519