PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 72-15-5 NON-ASBESTOS
72-15-5 NON-ASBESTOS ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 5.688 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 5.188 INCHES NOMINAL IN, material_document_and_classification: GARLOCK 2900, CAGEC 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-399-7042, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72-15-5 NON-ASBESTOS
NSN: 5330-01-399-7042
FSC: 5330
CAGE: 34294 — KRAISSL CO INC THE (USA)
SPECIFICATIONS
outside_diameter5.688 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter5.188 INCHES NOMINAL IN
material_document_and_classificationGARLOCK 2900, CAGEC 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-399-7042
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 72-15-5 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 5.188 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: GARLOCK 2900, CAGEC 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 5.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER5.188 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONGARLOCK 2900, CAGEC 73680 MFR REF SINGLE MATERIAL RESPONSE OVERALL
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER5.688 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
2910007006868Interchangeable
interchangeable cross-reference
interchangeable
D27094AInterchangeable
interchangeable cross-reference
interchangeable
38132Interchangeable
interchangeable cross-reference
interchangeable
7-215-5Interchangeable
interchangeable cross-reference
interchangeable
1384670Interchangeable
interchangeable cross-reference
interchangeable
A-1991-A 4INInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 72-15-5 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72-15-5 NON-ASBESTOS?
72-15-5 NON-ASBESTOS is a GASKET.
What parts can replace 72-15-5 NON-ASBESTOS?
There are 6 known substitutes for 72-15-5 NON-ASBESTOS: 2910007006868, D27094A, 38132 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 72-15-5 NON-ASBESTOS?
72-15-5 NON-ASBESTOS is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-399-7042. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72-15-5 NON-ASBESTOS

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026