PartsTable
Technical Data Sheet
Download PDF

72-0004-01 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

72-0004-01: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_diameter: 0.150 INCHES NOMINAL IN, overall_height: 0.440 INCHES NOMINAL IN, special_features: OUTSIDE EDGE TAPERS TO 0.590 IN. DIA AT COUNTERBORED END IN, style_designator: FLAT TOP COUNTERBORED, first_counterbore_depth: 0.250 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-01-138-4150, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
72-0004-01
NSN: 5340-01-138-4150
FSC: 5340 — Hardware, Commercial
CAGE: 61562 — UVP INC DBA ULTRA-VIOLET PRODUCTS (USA)
SPECIFICATIONS
materialRUBBER
hole_diameter0.150 INCHES NOMINAL IN
overall_height0.440 INCHES NOMINAL IN
special_featuresOUTSIDE EDGE TAPERS TO 0.590 IN. DIA AT COUNTERBORED END IN
style_designatorFLAT TOP COUNTERBORED
first_counterbore_depth0.250 INCHES NOMINAL IN
first_counterbore_diameter0.250 INCHES NOMINAL IN
outside/top_flange_diameter0.750 INCHES NOMINAL IN
NSN5340-01-138-4150
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 72-0004-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 0.750 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER
•
HOLE DIAMETER: 0.150 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.440 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.750 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER0.250 INCHES NOMINAL IN
STYLE DESIGNATORFLAT TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.250 INCHES NOMINAL IN
SPECIAL FEATURESOUTSIDE EDGE TAPERS TO 0.590 IN. DIA AT COUNTERBORED END IN
MATERIALRUBBER
HOLE DIAMETER0.150 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 72-0004-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 72-0004-01?
72-0004-01 is a BUMPER.
What is the NSN for 72-0004-01?
72-0004-01 is cataloged in the U.S. Government catalog under NSN 5340-01-138-4150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 72-0004-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.