PartsTable
Technical Data Sheet
Download PDF

71A5016A0023 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

71A5016A0023: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.196 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN, material: STEEL OVERALL, overall_width: 0.875 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: ZINC BAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-395-6599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
71A5016A0023
NSN: 5340-00-395-6599
FSC: 5340 — Hardware, Commercial
CAGE: 01365 — MARINE CORPS SYSTEMS COMMAND DIV MARINE CORPS SYSTEMS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE (USA)
SPECIFICATIONS
diameter0.196 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
materialSTEEL OVERALL
overall_width0.875 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentZINC BAND
material_thickness0.048 INCHES NOMINAL IN
loop_inside_diameter0.625 INCHES NOMINAL IN
material_document_and_classificationFED-STD-66 FED STD ALL MATERIAL RESPONSES OVERALL
distance_from_loop_center_to_tongue_end2.938 INCHES NOMINAL IN
distance_from_loop_center_to_short_tongue_end1.812 INCHES NOMINAL IN
center_to_center_distance_between_first_and_second_holes0.938 INCHES NOMINAL IN
NSN5340-00-395-6599
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 71A5016A0023 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED-STD-66 FED STD ALL MATERIAL RESPONSES OVERALL
•
DIAMETER: 0.196 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.048 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.938 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.938 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
MATERIAL DOCUMENT AND CLASSIFICATIONFED-STD-66 FED STD ALL MATERIAL RESPONSES OVERALL
DIAMETER0.196 INCHES MINIMUM AND 0.344 INCHES MAXIMUM IN
OVERALL WIDTH0.875 INCHES NOMINAL IN
MATERIAL THICKNESS0.048 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.938 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.938 INCHES NOMINAL IN
SURFACE TREATMENTZINC BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE2.438 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 71A5016A0023?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71A5016A0023?
71A5016A0023 is a CLAMP,LOOP.
What is the NSN for 71A5016A0023?
71A5016A0023 is cataloged in the U.S. Government catalog under NSN 5340-00-395-6599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71A5016A0023

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.