PartsTable
Technical Data Sheet
Download PDF

719215 — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

719215: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL ROLLER, bore_diameter: 0.3125 INCHES NOMINAL IN, overall_width: 0.4370 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, style_designator: NON-SEPARABLE, OPEN END, DRAWN SHELL. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-404-1290, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
719215
NSN: 3110-00-404-1290
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL ROLLER
bore_diameter0.3125 INCHES NOMINAL IN
overall_width0.4370 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
style_designatorNON-SEPARABLE, OPEN END, DRAWN SHELL
overall_outside_diameter0.5005 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
material_document_and_classificationHAYNES ALLOY,FSCM 80357 MFR REF SINGLE MATERIAL RESPONSE ROLLER
NSN3110-00-404-1290
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 719215 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL
•
MATERIAL DOCUMENT AND CLASSIFICATION: HAYNES ALLOY,FSCM 80357 MFR REF SINGLE MATERIAL RESPONSE ROLLER
•
OVERALL OUTSIDE DIAMETER: 0.5005 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
STYLE DESIGNATORNON-SEPARABLE, OPEN END, DRAWN SHELL
MATERIAL DOCUMENT AND CLASSIFICATIONHAYNES ALLOY,FSCM 80357 MFR REF SINGLE MATERIAL RESPONSE ROLLER
MATERIAL DOCUMENT AND CLASSIFICATIONPH15-7MD,FSCM 73030 MFR REF SINGLE MATERIAL RESPONSE OUTER RING
OVERALL WIDTH0.4370 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.5005 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.3125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
719215-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 719215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 719215?
719215 is a BEARING,ROLLER,NEEDLE.
What parts can replace 719215?
There is 1 known substitute for 719215: 719215-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 719215?
719215 is cataloged in the U.S. Government catalog under NSN 3110-00-404-1290. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 719215