PartsTable
Technical Data Sheet
Download PDF

71911 — CONTROLLER,TEST,ELECTRONIC SYSTE

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

71911: CONTROLLER,TEST,ELECTRONIC SYSTE.

CONTROLLER,TEST,ELECTRONIC SYSTE. Key specifications include diameter: 0.156 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, shank_style: STRAIGHT, skirt_style: RING, shank_length: 0.120 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-246-7004, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
71911
NSN: 5360-00-246-7004
NIINs: 002467004, 003054930, 007537019, 010887454, 013640875
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
diameter0.156 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
shank_styleSTRAIGHT
skirt_styleRING
shank_length0.120 INCHES NOMINAL IN
skirt_designNONDETACHABLE
coil_quantity4-1/2
overall_width0.250 INCHES NOMINAL IN
shank_diameter0.332 INCHES NOMINAL IN
inside_diameter1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
outside_diameter0.400 INCHES NOMINAL IN
NSN5360-00-246-7004
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CONTROLLER,TEST,ELECTRONIC SYSTE TITLE COMPONENT PN 71911 MFR CONTROLLER,TEST,ELECTR
KEY FEATURES
•
SPRING FREE OUTSIDE DIAMETER: 1.621 INCHES MINIMUM AND 1.652 INCHES MAXIMUM IN
•
END STYLE: SPRING END,SQUARED AND GROUND BOTH ENDS
•
SPRING SOLID LENGTH: 0.375 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CYLINDRICAL
•
SPRING FREE LENGTH: 1.547 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
COIL QUANTITY: 4-1/2
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
SPRING FREE OUTSIDE DIAMETER1.621 INCHES MINIMUM AND 1.652 INCHES MAXIMUM IN
END STYLESPRING END,SQUARED AND GROUND BOTH ENDS
SPRING SOLID LENGTH0.375 INCHES MAXIMUM IN
STYLE DESIGNATORCYLINDRICAL
SPRING FREE LENGTH1.547 INCHES NOMINAL IN
INSIDE DIAMETER1.469 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
COIL QUANTITY4-1/2
SURFACE TREATMENTCADMIUM OVERALL
COIL HELIX DIRECTIONLEFT-HAND
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
12003P11Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
202588Reference document
Same NSN cross-reference
Reference document — Secondary reference
5F2022Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-1035Reference document
Same NSN cross-reference
Reference document — Secondary reference
16T1594Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
45000-250-16Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 71911?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 71911?
71911 is a CONTROLLER,TEST,ELECTRONIC SYSTE.
What parts can replace 71911?
There are 6 known substitutes for 71911: 12003P11, 202588, 5F2022 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 71911?
71911 is cataloged in the U.S. Government catalog under NSN 5360-00-246-7004. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 71911