PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7190 H1L5
7190 H1L5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT, case_style: SQUARE, seal_width: 0.375 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF, housing_bore_diameter: 4.249 INCHES NOMINAL IN, sealing_element_style: VERTICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-253-2841, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7190 H1L5
NSN: 5330-00-253-2841
FSC: 5330
CAGE: 48482 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV ENGINEERED POLYMER SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
case_styleSQUARE
seal_width0.375 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
housing_bore_diameter4.249 INCHES NOMINAL IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter3.250 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3600 FEET PER MINUTE FT
NSN5330-00-253-2841
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7190 H1L5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 3.250 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SEALING ELEMENT STYLE: VERTICAL
•
HOUSING BORE DIAMETER: 4.249 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER3.250 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
CASE STYLESQUARE
SEAL WIDTH0.375 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEALING ELEMENT STYLEVERTICAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
HOUSING BORE DIAMETER4.249 INCHES NOMINAL IN
TEMP RATING-65.0 FAHRENHEIT AND 225.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
0943920003Interchangeable
interchangeable cross-reference
interchangeable
11-342Interchangeable
interchangeable cross-reference
interchangeable
N304-B45Interchangeable
interchangeable cross-reference
interchangeable
717-004410Interchangeable
interchangeable cross-reference
interchangeable
570C-505Interchangeable
interchangeable cross-reference
interchangeable
7030070Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7190 H1L5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7190 H1L5?
7190 H1L5 is a SEAL,PLAIN ENCASED.
What parts can replace 7190 H1L5?
There are 16 known substitutes for 7190 H1L5: 0943920003, 11-342, N304-B45 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7190 H1L5?
7190 H1L5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-253-2841. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7190 H1L5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026