719: MOUNTING BASE,ELECTRICAL EQUIPME.
MOUNTING BASE,ELECTRICAL EQUIPME. Key specifications include angle: 38.0 DEGREES, phase: SINGLE, width: 1.180 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN, height: 0.938 INCHES NOMINAL IN, length: 1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM IN, diameter: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5130-00-138-5552, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| angle | 38.0 DEGREES |
| phase | SINGLE |
| width | 1.180 INCHES MINIMUM AND 1.200 INCHES MAXIMUM IN |
| height | 0.938 INCHES NOMINAL IN |
| length | 1.430 INCHES MINIMUM AND 1.450 INCHES MAXIMUM IN |
| diameter | 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| material | NICKEL ALLOY OVERALL |
| thickness | 0.003 INCHES NOMINAL IN |
| body_style | BUSHING MOUNTED |
| body_width | 0.500 INCHES NOMINAL IN |
| drive_type | SDS PLUS |
| plate_type | NEGATIVE AND POSITIVE |
| NSN | 5130-00-138-5552 |
| SPEED ADJUSTMENTS | VARIABLE SPEED |
| PHASE | SINGLE |
| CURRENT TYPE | AC |
| NO LOAD SPEED IN RPM | 900.0 MAXIMUM |
| DRIVE TYPE | SDS PLUS |
| SPECIAL FEATURES | D-HANDLE; 0 TO 5500 MAX BPM; 1 IN. MAX SOLID BIT CAPACITY; 4 IN. MAX CORE BIT CAPACITY; HAMMER WITH ROTATION AND HAMMER ONLY OPERATION MODES; PROVIDED WITH DOUBLE INSULATION OR 3-WIRE GROUNDED PLUG; MAY BE SUPPLIED AS REVERSING OR NON-REVERSING; INCLUDES SIDE HANDLE, DEPTH ROD AND CASE IN |
| FREQUENCY RATING | 60.0 HERTZ NOMINAL |
| ALTERNATING CURRENT RATING IN AMPS | 5.5 |
| VOLTAGE RATING | 120.000 VOLTS NOMINAL |