7188338: GEAR,BEVEL.
The GEAR,BEVEL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: WEBBED, OFFSET, SOLID, bore_style: INVOLUTE SPLINE BOTH ENDS, teeth_type: STRAIGHT, pitch_angle: 63.4332 DEGREES, pitch_diameter: 8.0000 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 3020-00-385-7787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| body_style | WEBBED, OFFSET, SOLID |
| bore_style | INVOLUTE SPLINE BOTH ENDS |
| teeth_type | STRAIGHT |
| pitch_angle | 63.4332 DEGREES |
| pitch_diameter | 8.0000 INCHES NOMINAL IN |
| pressure_angle | 14.5000 DEGREES |
| teeth_quantity | 48 |
| hardness_rating | 28.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| spline_quantity | 26 BOTH ENDS |
| special_features | NO.4 10.112/-48NF-3B THD,0.3125 IN. LG LONGITUDINALLY IN FIRST HUB END,6 NO.8 10.1641-32NC-2B THD EQUALLY SPACED ON 1.8125 IN.BOLT CIRCLE,0.375 IN. DEEP IN |
| style_designator | SIDE FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING |
| NSN | 3020-00-385-7787 |
| BORE NOMINAL DIAMETER | 1.690 INCHES BOTH ENDS IN |
| HUB NOMINAL DIAMETER | 2.250 INCHES BOTH ENDS IN |
| BACKLASH DESIGNATION | GRADE B |
| NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.270 INCHES FIRST END IN |
| TEETH QUANTITY | 48 |
| BODY STYLE | WEBBED, OFFSET, SOLID |
| PITCH ANGLE | 63.4332 DEGREES |
| BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.969 INCHES SECOND END IN |
| TEETH TYPE | STRAIGHT |
No substitute or cross-reference records for this part.