7186991: GEAR,BEVEL.
The GEAR,BEVEL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_style: INVOLUTE SPLINE BOTH ENDS, teeth_type: STRAIGHT, pitch_diameter: 8.0000 INCHES NOMINAL IN, hardness_rating: 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL, spline_quantity: 26 BOTH ENDS. This part is cataloged in the U.S.
Government catalog under NSN 3020-00-385-7728, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL OVERALL |
| bore_style | INVOLUTE SPLINE BOTH ENDS |
| teeth_type | STRAIGHT |
| pitch_diameter | 8.0000 INCHES NOMINAL IN |
| hardness_rating | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| spline_quantity | 26 BOTH ENDS |
| special_features | 125 MICROINCH AA FINISH ON 2ND END HUB SURFACE,@63 MICROINCH AA FINISH ON GEAR AND SPLINE TOOTH SURFACES |
| style_designator | SIDE FACE, PROTRUDING HUBS |
| surface_treatment | OXIDE OVERALL |
| face_nominal_width | 1.500 INCHES IN |
| backlash_designation | GRADE A |
| hub_nominal_diameter | 2.250 INCHES SECOND END IN |
| NSN | 3020-00-385-7728 |
| HUB NOMINAL DIAMETER | 2.250 INCHES SECOND END IN |
| BACKLASH DESIGNATION | GRADE A |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.375 INCHES SECOND END IN |
| TEETH TYPE | STRAIGHT |
| HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| NOMINAL OVERALL LENGTH | 2.063 INCHES IN |
| STYLE DESIGNATOR | SIDE FACE, PROTRUDING HUBS |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
No substitute or cross-reference records for this part.