PartsTable
Technical Data Sheet
Download PDF

718210-170 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

718210-170: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OR STEEL COMP 303SE OVERALL, surface_finish: 8.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, surface_treatment: PASSIVATE OVERALL, pin_overall_length: 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN, pin_overall_diameter: 0.24965 INCHES MINIMUM AND 0.24975 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-765-3365, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
718210-170
NSN: 5315-00-765-3365
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 05869 — RAYTHEON COMPANY DIV RMD STRATEGIC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OR STEEL COMP 303SE OVERALL
surface_finish8.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
surface_treatmentPASSIVATE OVERALL
pin_overall_length2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
pin_overall_diameter0.24965 INCHES MINIMUM AND 0.24975 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-765-3365
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 718210-170 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 8.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.24965 INCHES MINIMUM AND 0.24975 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH8.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.24965 INCHES MINIMUM AND 0.24975 INCHES MAXIMUM IN
PIN OVERALL LENGTH2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
US3-22Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 718210-170?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 718210-170?
718210-170 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 718210-170?
There is 1 known substitute for 718210-170: US3-22. Substitute compatibility should be verified for your specific system.
What is the NSN for 718210-170?
718210-170 is cataloged in the U.S. Government catalog under NSN 5315-00-765-3365. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 718210-170

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.