PartsTable
Technical Data Sheet
Download PDF

718115-24 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

718115-24: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 AND RUBBER FLUOROCARBON CLASS FPM OVERALL, hole_diameter: 0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.344 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL OVERALL, style_designator: NON-CIRCULAR, aperture_diameter: 1.362 INCHES MINIMUM AND 1.382 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-088-0314, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
718115-24
NSN: 5330-01-088-0314
FSC: 5330 — Packing and Gasket Materials
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 AND RUBBER FLUOROCARBON CLASS FPM OVERALL
hole_diameter0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.344 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
style_designatorNON-CIRCULAR
aperture_diameter1.362 INCHES MINIMUM AND 1.382 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
bolt_hole_quantity4
gage_ring_thickness0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
bolt_circle_diameter1.802 INCHES MINIMUM AND 1.822 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
outside_corner_radius0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN
NSN5330-01-088-0314
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 718115-24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.106 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
GAGE RING THICKNESS: 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
SIDE RADIUS FROM GASKET CENTER: 1.058 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4027 ASSN STD 1ST MATERIAL RESPONSE AND MIL-R-83248,TY1,CL 1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.106 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
GAGE RING THICKNESS0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
SIDE RADIUS FROM GASKET CENTER1.058 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4027 ASSN STD 1ST MATERIAL RESPONSE AND MIL-R-83248,TY1,CL 1 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL WIDTH2.344 INCHES MINIMUM AND 2.404 INCHES MAXIMUM IN
APERTURE DIAMETER1.362 INCHES MINIMUM AND 1.382 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 6
CA-5465-07Reference document
Same NSN cross-reference
Reference document — Secondary reference
J219P07BReference document
Same NSN cross-reference
Reference document — Secondary reference
5330PL0626016Reference document
Same NSN cross-reference
Reference document — Informative reference only
J219P07AReference document
Same NSN cross-reference
Reference document — Secondary reference
J219P07Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
J219P07-24Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 718115-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 718115-24?
718115-24 is a GASKET.
What parts can replace 718115-24?
There are 6 known substitutes for 718115-24: CA-5465-07, J219P07B, 5330PL0626016 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 718115-24?
718115-24 is cataloged in the U.S. Government catalog under NSN 5330-01-088-0314. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 718115-24

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.