PartsTable
Technical Data Sheet
Download PDF

718086 — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

718086: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER, shank_diameter: 0.282 INCHES MINIMUM AND 0.342 INCHES MAXIMUM IN, outside/top_flange_diameter: 0.655 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN, material_document_and_classification: MIL-R-83248, TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-032-8111, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
718086
NSN: 5340-01-032-8111
NIINs: 010328111, 016231208
FSC: 5340 — Hardware, Commercial
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
materialRUBBER
shank_diameter0.282 INCHES MINIMUM AND 0.342 INCHES MAXIMUM IN
outside/top_flange_diameter0.655 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN
material_document_and_classificationMIL-R-83248, TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-032-8111
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 718086 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.282 INCHES MINIMUM AND 0.342 INCHES MAXIMUM IN
•
OUTSIDE/TOP FLANGE DIAMETER: 0.655 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248, TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.282 INCHES MINIMUM AND 0.342 INCHES MAXIMUM IN
OUTSIDE/TOP FLANGE DIAMETER0.655 INCHES MINIMUM AND 0.715 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248, TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 718086?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 718086?
718086 is a HOSE ASSEMBLY,NONMETALLIC.
What is the NSN for 718086?
718086 is cataloged in the U.S. Government catalog under NSN 5340-01-032-8111. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 718086

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.