PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 717801762-003
717801762-003 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CAMSHAFT,ACTUATING,BRAKE SHOE is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYAMIDE NYLON RETAINER, bore_diameter: 11.9994 INCHES MINIMUM AND 12.0000 INCHES MAXIMUM IN, contact_angle: 30.0 DEGREES NOMINAL, overall_width: 0.7100 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, load_direction: ANGULAR, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-333-2885, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
717801762-003
NSN: 3110-01-333-2885
FSC: 3110
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC POLYAMIDE NYLON RETAINER
bore_diameter11.9994 INCHES MINIMUM AND 12.0000 INCHES MAXIMUM IN
contact_angle30.0 DEGREES NOMINAL
overall_width0.7100 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
special_featuresEACH BEARING SHALL BE LUBRICATED WITH 9 DROPS MIN,11 DROPS MAX OF SPECIFIED LUBE EVENLY DISTRIBUTED AROUND CIRCUMFERENCE
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
surface_treatmentPASSIVATE BALL
bearing_preload_rating475.0 POUNDS MINIMUM AND 525.0 POUNDS MAXIMUM LBS
overall_outside_diameter12.7494 INCHES MINIMUM AND 12.7500 INCHES MAXIMUM IN
retainer_fabrication_methodMACHINED
NSN3110-01-333-2885
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 717801762-003 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE BALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
MATERIAL: PLASTIC POLYAMIDE NYLON RETAINER
•
BORE DIAMETER: 11.9994 INCHES MINIMUM AND 12.0000 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 12.7494 INCHES MINIMUM AND 12.7500 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE INNER RING
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A380 ASSN STD SINGLE TREATMENT RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
MATERIALPLASTIC POLYAMIDE NYLON RETAINER
BORE DIAMETER11.9994 INCHES MINIMUM AND 12.0000 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL OUTSIDE DIAMETER12.7494 INCHES MINIMUM AND 12.7500 INCHES MAXIMUM IN
MATERIALSTEEL COMP 440C INNER RING
SURFACE TREATMENTPASSIVATE INNER RING
MATERIALOIL LUBRICATION
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
17581Interchangeable
interchangeable cross-reference
interchangeable
202100-205LInterchangeable
interchangeable cross-reference
interchangeable
7032715Interchangeable
interchangeable cross-reference
interchangeable
M16WK102-17Interchangeable
interchangeable cross-reference
interchangeable
17580Interchangeable
interchangeable cross-reference
interchangeable
8289XSInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 717801762-003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 717801762-003?
717801762-003 is a CAMSHAFT,ACTUATING,BRAKE SHOE.
What parts can replace 717801762-003?
There are 7 known substitutes for 717801762-003: 17581, 202100-205L, 7032715 and 4 more. Substitute compatibility should be verified for your specific system.
Is 717801762-003 still available?
717801762-003 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 717801762-003

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026