PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 717801762-002
717801762-002 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: OIL LUBRICATING LUBRICATION, bore_diameter: 11.9994 INCHES MINIMUM AND 12.0000 INCHES MAXIMUM IN, contact_angle: 30.0 DEGREES NOMINAL, overall_width: 0.7100 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-322-8820, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
717801762-002
NSN: 3110-01-322-8820
FSC: 3110
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
materialOIL LUBRICATING LUBRICATION
bore_diameter11.9994 INCHES MINIMUM AND 12.0000 INCHES MAXIMUM IN
contact_angle30.0 DEGREES NOMINAL
overall_width0.7100 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
load_directionRADIAL
surface_finishGROUND
special_featuresEACH BEARING LUBRICATED WITH 1.75-2.75 CC OF SPECIFIED LUBE
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
surface_treatmentPASSIVATE INNER RING
bearing_preload_rating475.0 POUNDS MINIMUM AND 525.0 POUNDS MAXIMUM LBS
overall_outside_diameter12.7494 INCHES MINIMUM AND 12.7500 INCHES MAXIMUM IN
material_document_and_classificationUNABLE TO DECODE
NSN3110-01-322-8820
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 717801762-002 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
BORE DIAMETER: 11.9994 INCHES MINIMUM AND 12.0000 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE INNER RING
•
SURFACE TREATMENT: PASSIVATE INNER RING
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH0.7100 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
BORE DIAMETER11.9994 INCHES MINIMUM AND 12.0000 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM A380 ASSN STD SINGLE TREATMENT RESPONSE INNER RING
SURFACE TREATMENTPASSIVATE INNER RING
MATERIALOIL LUBRICATING LUBRICATION
CONTACT ANGLE30.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
103S14Interchangeable
interchangeable cross-reference
interchangeable
2523Interchangeable
interchangeable cross-reference
interchangeable
302677Interchangeable
interchangeable cross-reference
interchangeable
17397Interchangeable
interchangeable cross-reference
interchangeable
642978Interchangeable
interchangeable cross-reference
interchangeable
902599Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 717801762-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 717801762-002?
717801762-002 is a BEARING,BALL,DUPLEX.
What parts can replace 717801762-002?
There are 13 known substitutes for 717801762-002: 103S14, 2523, 302677 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 717801762-002?
717801762-002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-322-8820. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 717801762-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026