PartsTable
Technical Data Sheet
Download PDF

717751198-001 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

717751198-001: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE, overall_height: 2.250 INCHES NOMINAL IN, overall_length: 4.000 INCHES NOMINAL IN, special_features: FOUR PLACES CHAMFERED 0.250 IN. BY 45 DEG; ONE HOLE 0.875 IN.

DIA AND 1.200 IN. BY 100 DEG CSK IN, material_thickness: 1.500 INCHES NOMINAL IN, mounting_hole_diameter: 0.220 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-307-2672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
717751198-001
NSN: 5340-01-307-2672
FSC: 5340 — Hardware, Commercial
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE
overall_height2.250 INCHES NOMINAL IN
overall_length4.000 INCHES NOMINAL IN
special_featuresFOUR PLACES CHAMFERED 0.250 IN. BY 45 DEG; ONE HOLE 0.875 IN. DIA AND 1.200 IN. BY 100 DEG CSK IN
material_thickness1.500 INCHES NOMINAL IN
mounting_hole_diameter0.220 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
material_document_and_classificationL-P-410,COMP 6/6 FED SPEC SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers3.000 INCHES NOMINAL IN
NSN5340-01-307-2672
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 717751198-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 3.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-410,COMP 6/6 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.220 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 1.500 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.250 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTERS3.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-410,COMP 6/6 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.220 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
OVERALL LENGTH4.000 INCHES NOMINAL IN
MATERIAL THICKNESS1.500 INCHES NOMINAL IN
SPECIAL FEATURESFOUR PLACES CHAMFERED 0.250 IN. BY 45 DEG; ONE HOLE 0.875 IN. DIA AND 1.200 IN. BY 100 DEG CSK IN
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 717751198-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 717751198-001?
717751198-001 is a RETAINER,NUT AND BOLT.
What is the NSN for 717751198-001?
717751198-001 is cataloged in the U.S. Government catalog under NSN 5340-01-307-2672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 717751198-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.