PartsTable
Technical Data Sheet
Download PDF

717751182-001 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

717751182-001: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OVERALL, shank_length: 1.540 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.420 INCHES NOMINAL IN, overall_length: 2.570 INCHES NOMINAL IN, shank_diameter: 0.183 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-329-9872, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
717751182-001
NSN: 5315-01-329-9872
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 04939 — LOCKHEED MARTIN CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OVERALL
shank_length1.540 INCHES NOMINAL IN
thread_class2A A
thread_length0.420 INCHES NOMINAL IN
overall_length2.570 INCHES NOMINAL IN
shank_diameter0.183 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
undercut_width0.080 INCHES NOMINAL IN
first_end_styleCHAMFERED
second_end_styleSQUARE
style_designatorUNDERCUT
thread_directionRIGHT-HAND
first_end_locationRADIUS END
NSN5315-01-329-9872
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 717751182-001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.183 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.080 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.132 INCHES NOMINAL IN
•
FIRST END LOCATION: RADIUS END
•
THREAD LENGTH: 0.420 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 1.540 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.183 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT WIDTH0.080 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.132 INCHES NOMINAL IN
FIRST END LOCATIONRADIUS END
THREAD LENGTH0.420 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH1.540 INCHES NOMINAL IN
STYLE DESIGNATORUNDERCUT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 717751182-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 717751182-001?
717751182-001 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 717751182-001?
717751182-001 is cataloged in the U.S. Government catalog under NSN 5315-01-329-9872. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 717751182-001

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.