PartsTable
Technical Data Sheet
Download PDF

717159-2 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

717159-2: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.104 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN, material: COPPER ALLOY BAND, overall_width: 0.188 INCHES NOMINAL IN, style_designator: SINGLE LOOP, surface_treatment: CADMIUM BAND, material_thickness: 0.015 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-044-5219, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
717159-2
NSN: 5340-00-044-5219
FSC: 5340 — Hardware, Commercial
CAGE: 1NZ85 — EMCORE SPACE & NAVIGATION CORPORATION DIV SPACE & NAVIGATION (USA)
SPECIFICATIONS
diameter0.104 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
materialCOPPER ALLOY BAND
overall_width0.188 INCHES NOMINAL IN
style_designatorSINGLE LOOP
surface_treatmentCADMIUM BAND
material_thickness0.015 INCHES NOMINAL IN
loop_inside_diameter0.210 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.328 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.235 INCHES NOMINAL IN
NSN5340-00-044-5219
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 717159-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.104 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.015 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.328 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.235 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.104 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
OVERALL WIDTH0.188 INCHES NOMINAL IN
MATERIAL THICKNESS0.015 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.328 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.235 INCHES NOMINAL IN
MATERIALCOPPER ALLOY BAND
LOOP INSIDE DIAMETER0.210 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 717159-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 717159-2?
717159-2 is a CLAMP,LOOP.
What is the NSN for 717159-2?
717159-2 is cataloged in the U.S. Government catalog under NSN 5340-00-044-5219. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 717159-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.